| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours Online |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The gear driven three-cylinder dryer is to change the single-cylinder body of the single-cylinder dryer into three cylindersstacked together to shorten the outine size of the drying body. When the machine is working, the material and hot gasflow into the inner to outer cylinder in turn, after the Z-shaped reciprocating fow of the body, the heat energy is fuly usedto drny the material before unloading. The three-cylinder drver can make full use of waste heat, reduce heat loss, in.crease the heat exchange area, and greatly improve the evaporation intensity per unit volume of the dryer.
| Model | Gradient(%) | Rotation Speed (r/min) | Feed-in Gas Temperature | Power(kw) | Capacity(t/h) | Weight(t) |
| 600x6000 | 3-5 | 3-8 | ≤700 | 3 | 0.5-1.5 | 2.9 |
| 800x8000 | 3-5 | 3-8 | ≤700 | 4 | 0.8-2.0 | 3.5 |
| 800x10000 | 3-5 | 3-8 | ≤700 | 4 | 0.5-2.5 | 4.5 |
| 1000x10000 | 3-5 | 3-8 | ≤700 | 5.5 | 1.0-3.5 | 5.6 |
| 1200x10000 | 3-5 | 3-8 | ≤700 | 7.5 | 1.8-5 | 14.5 |
| 1200x12000 | 3-5 | 3-8 | ≤700 | 11 | 2-6 | 14.8 |
| 1500x12000 | 3-5 | 2-6 | ≤800 | 15 | 3.5-9 | 17.8 |
| 1800x12000 | 3-5 | 2-6 | ≤800 | 18 | 5-12 | 25 |
| 2200x12000 | 3-5 | 1.5-6 | ≤800 | 18.5 | 6-15 | 33 |
| 2200x18000 | 3-5 | 1.5-6 | ≤800 | 22 | 10.18 | 53.8 |
| 2200x20000 | 3-5 | 1.5-6 | ≤800 | 30 | 12-20 | 56 |
| 2400x20000 | 3-5 | 1.5-5 | ≤800 | 37 | 18-30 | 60 |
| 3000x20000 | 3-5 | 1.5-5 | ≤800 | 55 | 25-35 | 78 |
| 3000x25000 | 3-5 | 1.5-5 | ≤800 | 75 | 32-40 | 104.9 |
1.The cylinder self-insulation, thermal eficiency of up to 80% (single cylinder dryer themal eficiency is only 35%, thanthe single cylinder drying coal saving 68%, the output is also relatively improved.
2.The length of the whole machine is 60% shorter than that of the single cylinder dryer, which is conducive to the processlayout, Reduce the building area of the plant and save about 40% of the project investment.
3.The use of heat-resistant and wear-resistant alloy steel plate, 4 times wear-resistant than ordinary steel plate. Long service life, easy maintenance.
4.High thermal efficiency, the outer cylinder temperature is below 60'c(the outer cylinder femperature of the single cylinder drver is up to 150'C), the outlet temperature is low, and the discharge temperature is below 60°C.
5.The outlet temperature is low, is conducive to the use of dust removal equloment for a lona time, can be dlrectly sup.porting the air box pulse bag dust collector.
6.Lower the landing cost 50% and power consumption 60%
7.Multiple transition choices.
){kind=link}